Specifications and Options available | Optical Fiber Fluorescence Detector | Micro Chemical System Products | Information Technology

Specifications and Options available/Optical Fiber Fluorescence Detector

Product Name	FLE1000	FLE500 (Available soon)
Target fluorescent materials	B type FITC, FAM, SYBR Green, GFP, etc. G type Cy3, Resorufin, etc. R type Cy5, etc. U type UV dye(under development)
Sensitivity	Detection Limit is arround 1nM (depending on the specimen and its shape)	Detection Limit is arround 5nM (depending on the specimen and its shape)
Required amount of sample	1 μL or less (even a DNA array chip of 0.1 mm in diameter can be measured)	1μL or less
Data output	Analog or RS-232C output (Simple RS-232C datalogging software for WindousXP is available)	Analog output
Response time	analog : 0.1sec(typ) RS-232C : 0.1sec	0.2sec(typ)
Size	130×160×40 mm	100×75×30 mm
Power supply	DC24V (a converter from AC100 V is available)	DC12V
Measurement spot	0.2 mm in diameter (can be specified)	0.2mm in diameter (can be specified)
Probe head	4 mm in diameter (using the SELFOC® Micro Lens)	4mm in diameter (using the SELFOC® Micro Lens)
Upper temperature limit of probe	Up to 110°C	Up to 110°C

*This product can be customized as a fluorescence detection module for various types of analyzers.

Other wavelengths: Excitation by near-ultraviolet and violet rays (under development)
Simultaneous measurements at two wavelengths: (under development)
Manual probe stage: The probe position can be fine-adjusted in the x, y and z directions on the flat sample stage.